Aggregator Port Group - Brocade Communications Systems StoreFabric SN6500B Reference Manual

Aggregator port group

TABLE 117
object and OID
dot3adAggPortTable
1.2.840.10006.300.43.1.
2.1
dot3adAggPortEntry
1.2.840.10006.300.43.1.
2.1.1
dot3adAggPortIndex
1.2.840.10006.300.43.1.
2.1.1.1
dot3adAggPortActorSyste
mPriority
1.2.840.10006.300.43.1.
2.1.1.2
dot3adAggPortActorSyste
mID
1.2.840.10006.300.43.1.
2.1.1.3
dot3adAggPortActorAdmin
Key
1.2.840.10006.300.43.1.
2.1.1.4
dot3adAggPortActorOperK
ey
1.2.840.10006.300.43.1.
2.1.1.5
dot3adAggPortPartnerAd
minSystemPriority
1.2.840.10006.300.43.1.
2.1.1.6
dot3adAggPortPartnerOpe
rSystemPriority
1.2.840.10006.300.43.1.
2.1.1.7
dot3adAggPortPartnerAd
minSystemID
1.2.840.10006.300.43.1.
2.1.1.8
Fabric OS MIB Reference
53-1002750-01
Access Description
Not A table that contains link aggregation control configuration information
accessible about every aggregation port associated with the device. A row appears
in this table for each physical port.
Not A list of link aggregation control configuration parameters for each
accessible aggregation port on the device.
Read only The ifIndex of the port.
Read-write A 2-octet read-write value used to define the priority value associated
with the actor's system ID.
Read only A 6-octet read-only MAC address value that defines the value of the
system ID for the system that contains this aggregation port.
Read-write The current administrative value of the key for the aggregation port. This
is a 16-bit, read-write value. The meaning of particular key values is of
local significance.
Read only The current operational value of the key for the aggregation port. This is
a 16-bit value. The meaning of particular key values is of local
significance.
Read-write A 2-octet read-write value used to define the administrative value of
priority associated with the partner's system ID. The assigned value is
used, along with the value of aAggPortPartnerAdminSystemID,
aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and
aAggPortPartnerAdminPortPriority, in order to achieve manually
configured aggregation.
Read only A 2-octet read-only value indicating the operational value of priority
associated with the partner's system ID. The value of this attribute may
contain the manually configured value carried in
aAggPortPartnerAdminSystemPriority if there is no protocol partner.
Read-write A 6-octet read-write MAC address value representing the administrative
value of the aggregation port's protocol partner's system ID. The
assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey,
aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in
order to achieve manually configured aggregation.
NOTE: This object is not supported.
Aggregator port group
17
307