Updates To The Introduction; Using Access Gateway With Brocade Mibs - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Manual
Brocade fabric os documentation addendum - supporting fabric os v5.2.x (53-1000429-01-hp)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
3
Updates to the Introduction
Updates to the Introduction
Add the
chapter on page 1-8 after the SilkWorm 7500 / FR4-18i and Brocade MIBs section.
Using Access Gateway with Brocade MIBs
Brocade Access Gateway supports the following MIBs:
Table 3-1
MIB Name
MIB-2
Entity-MIB
HA MIB
SW-MIB
FA-MIB
FE-MIB
CPQ-Rack MIB
3-2
"Using Access Gateway with Brocade MIBs" on page 3-2
Access Gateway MIB Support
Supported
Yes
Yes
Yes
No
Yes
No
Limited
of this document to the Introduction
Description
Updated to support Access Gateway in v5.2.1.
Disabled in Access Gateway because the conventions are
specific to fabric switches.
The connUnitSnsTable is not supported because a switch in
Access Gateway does support name server services.
Disabled in Access Gateway because the conventions are
specific to fabric switches.
Supported on embedded switches only.
Publication Number: 53-1000429-01-HP
Fabric OS Documentation Addendum
Advertisement
Table of Contents
