Brocade Communications Systems StoreFabric SN6500B Reference Manual page 70

2
SNMP group
TABLE 15
Object and OID
snmpOutTooBigs
1.3.6.1.2.1.11.20
snmpOutNoSuchNames
1.3.6.1.2.1.11.21
snmpOutBadValues
1.3.6.1.2.1.11.22
snmpOutGenErrs
1.3.6.1.2.1.11.24
snmpOutGetRequests
1.3.6.1.2.1.11.25
snmpOutGetNexts
1.3.6.1.2.1.11.26
snmpOutSetRequests
1.3.6.1.2.1.11.27
snmpOutGetResponses
1.3.6.1.2.1.11.28
snmpOutTraps
1.3.6.1.2.1.11.29
snmpEnableAuthenTraps
1.3.6.1.2.1.11.30
snmpSilentDrops
1.3.6.1.2.1.11.31
snmpProxyDrops
1.3.6.1.2.1.11.32
50
Access Description
Read only The total number of SNMP PDUs that were generated by the SNMP
protocol entity and for which the value of the error-status field is too
large.
Read only The total number of SNMP PDUs that were generated by the SNMP
protocol entity and for which the value of the error-status field is
"noSuchName."
Read only The total number of SNMP PDUs that were generated by the SNMP
protocol entity and for which the value of the error-status field is
"badValue."
Read only The total number of SNMP PDUs that were generated by the SNMP
protocol entity and for which the value of the error-status field is
"genErr."
Read only The total number of SNMP Get-Request PDUs that have been
generated by the SNMP protocol entity.
Read only The total number of SNMP Get-Next PDUs that have been generated
by the SNMP protocol entity.
Read only The total number of SNMP Set-Request PDUs that have been
generated by the SNMP protocol entity.
Read only The total number of SNMP Get-Response PDUs that have been
generated by the SNMP protocol entity.
Read only The total number of SNMP Trap PDUs that have been generated by the
SNMP protocol entity.
Read only Indicates whether the SNMP agent process is permitted to generate
authentication-failure traps. The value of this object overrides any
configuration information; as such, it provides a means whereby all
authentication-failure traps might be disabled.
Possible values are:
•
enabled (1)
•
disabled (2)
This object is stored in nonvolatile memory so that it remains constant
between re-initialization of the switch. This value can be changed with
the snmpconfig command.
Read only The total number of Confirmed Class PDUs (such as GetRequest-PDUs,
GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and
InformRequest-PDUs) delivered to the SNMP entity and which were
silently dropped because the size of a reply containing an alternate
Response Class PDU (such as a Response-PDU) with an empty
variable-bindings field was greater than either a local constraint or the
maximum message size associated with the originator of the request.
Read only The total number of Confirmed Class PDUs (such as GetRequest-PDUs,
GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and
InformRequest-PDUs) delivered to the SNMP entity and which were
silently dropped because the transmission of the (possibly translated)
message to a proxy target failed in a manner (other than a time-out)
such that no Response Class PDU (such as a Response-PDU) could be
returned.
Fabric OS MIB Reference
53-1002750-01