Fcfeacct Group - Brocade Communications Systems StoreFabric SN6500B Reference Manual

4

fcFeAcct group

TABLE 35
Object and OID
fcFxPortErrorTable
1.3.6.1.3.42.2.1.3.1
fcFxPortErrorEntry
1.3.6.1.3.42.2.1.3.1.1
fcFxPortErrorModuleIndex
1.3.6.1.3.42.2.1.3.1.1.1
fcFxPortErrorFxPortIndex
1.3.6.1.3.42.2.1.3.1.1.2
fcFxPortLinkFailures
1.3.6.1.3.42.2.1.3.1.1.3
fcFxPortSyncLosses
1.3.6.1.3.42.2.1.3.1.1.4
fcFxPortSigLosses
1.3.6.1.3.42.2.1.3.1.1.5
fcFxPortPrimSeqProtoErro
rs
1.3.6.1.3.42.2.1.3.1.1.6
fcFxPortInvalidTxWords
1.3.6.1.3.42.2.1.3.1.1.7
fcFxPortInvalidCrcs
1.3.6.1.3.42.2.1.3.1.1.8
fcFxPortDelimiterErrors
1.3.6.1.3.42.2.1.3.1.1.9
fcFxPortAddressIdErrors
1.3.6.1.3.42.2.1.3.1.1.10
fcFxPortLinkResetIns
1.3.6.1.3.42.2.1.3.1.1.11
fcFxPortLinkResetOuts
1.3.6.1.3.42.2.1.3.1.1.12
fcFxPortOlsIns
1.3.6.1.3.42.2.1.3.1.1.13
fcFxPortOlsOuts
1.3.6.1.3.42.2.1.3.1.1.14
fcFeAcct group
Brocade supports fcFxPortC2AccountingTable and fcFxPortC3AccountingTable.
100
Access Description
Not This table contains one entry for each Fx_Port in the fabric element, and
accessible counters recording numbers of errors detected since the management
agent re-initialized.
The first six columnar objects after the port index correspond to the
counters in the Link ErrorStatus Block.
Not An entry containing error counters of an Fx_Port.
accessible
Read only Identifies the module containing the Fx_Port for which this entry
contains information.
Read only Identifies the Fx_Port within the module. This number ranges from 1 to
the value of fcFeModulePortCapacity for the associated module. The
value remains constant for the identified Fx_Port until the module is
re-initialized.
Read only The number of link failures detected by this Fx_Port.
Read only The number of loss of synchronization errors detected by the Fx_Port.
Read only The number of loss of signal errors detected by the Fx_Port.
Read only The number of primitive sequence protocol errors detected by the
Fx_Port.
Read only The number of invalid transmission word errors detected by the Fx_Port.
Read only The number of invalid Cyclic Redundancy Checks (CRCs) detected by this
Fx_Port.
Read only The number of Delimiter errors detected by this Fx_Port.
Read only The number of address identifier errors detected by this Fx_Port.
Read only The number of Link Reset Protocol errors received by this Fx_Port from
the attached Nx_Port.
Read only The number of Link Reset Protocol errors issued by this Fx_Port to the
attached Nx_Port.
Read only The number of Offline Sequence errors received by this Fx_Port.
Read only The number of Offline Sequence errors issued by this Fx_Port.
Fabric OS MIB Reference
53-1002750-01