Sw Traps - Brocade Communications Systems StoreFabric SN6500B Reference Manual

TABLE 42
SW-MIB textual conventions (Continued)
Type definition Value
EportUtil and EportPktl are the MIB defines used for VE ports for Legacy FCIP (FR4-18i router blade/Brocade 7500), while VEPortUtil and
VEPortPktlLoss are used for VE ports for Brocade 7800 Extension Switch/FX8-24 DCX Extension Blade.
In the index swFwEnvTemp, Env refers to Environment class and Temp refers to the area Temperature.
SwFwWriteVals Integer
SwFwTimebase Integer
SwFwStatus Integer
SwFwEvent Integer
SwFwBehavior Integer
SwFwState Integer
SwFwLicense Integer

sw traps

This section contains descriptions and other information that is specific to sw traps.
From Fabric OS v6.2.0, the sw traps will have an extra binding associated to indicate the Virtual
Fabric (VF). The traps will have a Virtual Fabric ID (VFID) associated with them.
For the fourteen traps defined in the SW-MIB and how to configure the trap, refer to
Fabric OS MIB Reference
53-1002750-01
Description
Write-only variable for applying or canceling values or action matrix changes:
1 swFwCancelWrite
2 swFwApplyWrite
Timebase for thresholds:
1 swFwTbNone
2 swFwTbSec
3 swFwTbMin
4 swFwTbHour
5 swFwTbDay
Status for thresholds:
1 disabled
2 enabled
Possible events available:
1 started
2 changed
3 exceeded
4 below
5 above
6 inBetween
7 lowBufferCrsd
Behavior type for thresholds:
1 triggered
2 continuous
State type for last events:
1 swFwInformative
2 swFwNormal
3 swFwfaulty
Fabric Watch License state:
1 swFwLicensed
2 swFwNotLicensed
6
sw traps
Table 43.
135