Download Print this page

Switch Agent Configuration Group - Brocade Communications Systems StoreFabric SN6500B Reference Manual

Brocade fabric os mib reference v7.1.0 (53-1002750-01, march 2013)
Hide thumbs Also See for StoreFabric SN6500B:

Advertisement

TABLE 48
Object and OID
swPmgrEventDescr
1.3.6.1.4.1.1588.2.1.1.1
.2.14
swVfId
1.3.6.1.4.1.1588.2.1.1.1
.2.15
swVfName
1.3.6.1.4.1.1588.2.1.1.1
.2.16

Switch agent configuration group

TABLE 49
Object and OID
swAgtCfg
1.3.6.1.4.1.1588.2.1.1.1
.4
swAgtCmtyTable
1.3.6.1.4.1.1588.2.1.1.1
.4.11
swAgtCmtyEntry
1.3.6.1.4.1.1588.2.1.1.1
.4.11.1
swAgtCmtyIdx
1.3.6.1.4.1.1588.2.1.1.1
.4.11.1.1
swAgtCmtyStr
1.3.6.1.4.1.1588.2.1.1.1
.4.11.1.2
Fabric OS MIB Reference
53-1002750-01
Access
Description
Not
This object identifies the textual description of the events mentioned in
accessible
swPmgrEventType.
Read only
The virtual Fabric ID of the switch.
Read only
This represents the virtual switch name configured in the switch.
Access
Description
Not
The OID sub-tree for switch agent configuration group.
accessible
Not
A table that contains, one entry for each community, the access control
accessible
and parameters of the community.
The table displays all of the community strings (read and write) if it is
accessed by the "write" community string. Only "read" community
strings are displayed if it is accessed by the "read" community string.
In Secure Fabric OS, the community strings can only be modified on the
primary switch.
NOTE: This table is deprecated in Fabric OS v7.0. Use the tables
snmpTargetAddrTable, snmpTargetParamsTable,
snmpCommunityTable to get the required data.
Not
An entry containing the community parameters.
accessible
Read only
The SNMPv1 community entry.
The return value for this entry is 1 through 6.
Read-write
This is a community string supported by the agent. If a new value is set
successfully, it takes effect immediately.
Default values for communities are as follows:
1 (Secret Code)
2 (OrigEquipMfr)
3 (private)
4 (public)
5 (common)
6 (FibreChannel)
Community strings 1-3 are read-write and strings 4-6 are read only.
You can change the community setting using the snmpconfig command.
Switch agent configuration group
6
151

Advertisement

loading