Brocade Communications Systems StoreFabric SN6500B Reference Manual page 276

12
iSCSI node attributes table
TABLE 95
Object and OID
iscsiNodeAlias
1.3.6.1.2.1.142.1.1.5.1.1.3
iscsiNodeRoles
1.3.6.1.2.1.142.1.1.5.1.1.4
iscsiNodeTransportType
1.3.6.1.2.1.142.1.1.5.1.1.5
iscsiNodeInitialR2T
1.3.6.1.2.1.142.1.1.5.1.1.6
iscsiNodeImmediateData
1.3.6.1.2.1.142.1.1.5.1.1.7
iscsiNodeMaxOutstandingR2
T
1.3.6.1.2.1.142.1.1.5.1.1.8
iscsiNodeFirstBurstLength
1.3.6.1.2.1.142.1.1.5.1.1.9
iscsiNodeMaxBurstLength
1.3.6.1.2.1.142.1.1.5.1.1.10
iscsiNodeMaxConnections
1.3.6.1.2.1.142.1.1.5.1.1.11
iscsiNodeDataSequenceInOrd
er
1.3.6.1.2.1.142.1.1.5.1.1.12
iscsiNodeDataPDUInOrder
1.3.6.1.2.1.142.1.1.5.1.1.13
iscsiNodeDefaultTime2Wait
1.3.6.1.2.1.142.1.1.5.1.1.14
256
Access Description
A character string that is a human-readable name or description of
the iSCSI node. If configured, this alias may be communicated to the
initiator to target node at the remote end of the connection during a
log in request or response.
NOTE: This object is not supported.
A node can operate in a target role, initiator role, or both. It is hard
coded to the value target role.
A pointer to the corresponding row in the appropriate table for this
SCSI transport. This pointer is used by management stations to
locate the SCSI-level device represented by this iSCSI node.
NOTE: This object is not supported.
An object that indicates the InitialR2T preference for this node.
When implemented, true=YES, false=will try to negotiate NO, but will
accept YES.
NOTE: This object is not supported.
Read-write An object that indicates the ImmediateData preference for this
node. When implemented, true=YES, but will accept NO, false=NO.
NOTE: This object is not supported.
Read-write The maximum number of outstanding requests to transmit (R2Ts)
allowed per iSCSI task.
NOTE: This object is not supported.
Read-write The maximum length in bytes supported for unsolicited data to or
from this node.
NOTE: This object is not supported.
Read-write The maximum number of bytes that can be sent within a single
sequence of data-in or data-out PDUs.
NOTE: This object is not supported.
Read-write The maximum number of connections allowed in each session to or
from this node.
Hard coded to two.
Read-write The preference for the order of transfer for iSCSI data PDU
sequences. False (NO) indicates that PDU sequences may be
transferred in any order. True (YES) indicates that data PDU
sequences must be transferred using continuously increasing
offsets, except during error recovery.
NOTE: This object is not supported.
Read-write The preference for the order of iSCSI data PDUs within iSCSI data
PDU sequences. False (NO) indicates that data PDUs may be
transferred in any order within a sequence. True (YES) indicates that
data PDUs must be transferred using continuously increasing
addresses within a sequence, with no gaps or overlay between
PDUs.
NOTE: This object is not supported.
Read-write The minimum time, in seconds, to wait before attempting an explicit
or implicit logout or active iSCSI task reassignment after an
unexpected connection termination or a connection reset.
NOTE: This object is not supported.
Fabric OS MIB Reference
53-1002750-01