Fibre Channel Port Group - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

Brocade fabric os mib reference guide v6.2.0 (53-1001156-01, april 2009)

Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:

Table of Contents

swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4

This is the trap severity level associated with

trap severity level, is in conjunction with the event's severity level. When an event occurs, and if its

severity level is at or below the set value, the SNMP trap is sent to configure trap recipients. The

severity level is limited to particular events. If a new value is set successfully, it takes effect

immediately.

This object obsoletes

Fibre Channel Port Group

This group contains information about the physical state, operational status, performance, and

error statistics of each Fibre Channel port on the switch. A Fibre Channel port is one which

supports the Fibre Channel protocol, such as F_Port, E_Port, U_Port, or FL_Port.

swAgtTrapRcp

swEventTrapLevel

1.3.6.1.4.1.1588.2.1.1.1.8.1.

1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3. The

Fabric OS MIB Reference

53-1001156-01

Table of Contents