Viewing Maps, Events, And Configurations; Viewing A Physical Connection Map; Description Of A Physical Connection Map; Physical Connection Map - HP StorageWorks SN6000 - Fibre Channel Switch User Manual

4

Viewing maps, events, and configurations

This chapter provides procedures that describe the following options:
• "Viewing a Physical Connection map,"
• "Viewing a LUN Assignment map,"
• "Viewing the event log,"
• "Saving and comparing SAN configurations,"

Viewing a Physical Connection map

Simple SAN Connection Manager provides a graphical representation of physical connections among the
storage subsystems, switches, and HBAs within the SAN. This graphical representation is the Physical
Connection map shown in the content pane (see

Description of a Physical Connection map

The Physical Connection map
devices in the SAN.
Figure 21

Physical Connection map

The map shows the following components:
• Switches:
• A black line between switches indicates an inter-switch link (ISL).
• A grayed-out switch on the map indicates a remote fabric (Brocade or Cisco fabric that may contain
multiple switches) connected by means of an active TR_Port.
page 45
page 46
page 47
page 48
Figure
(Figure 21) uses blue lines to designate the physical connections between
HP StorageWorks Simple SAN Connection Manager User Guide
21).
45