New Logical Disk Server Presentation Dialog Box (Eva Storage) - HP StorageWorks SN6000 - Fibre Channel Switch User Manual

• Size—Enter the capacity of the disk you are adding as a logical disk. (Size must not exceed the
indicated Maximum LUN size. The maximum size changes according to the RAID type selected.)
• Name—(Optional) Enter a name (maximum 32 characters) for the new logical disk. If no name is
specified, Simple SAN Connection Manager uses the default name assigned by the subsystem.
The New Logical Disk Server Presentation dialog box
Figure 52

New Logical Disk Server Presentation dialog box (EVA storage)

The left column lists Servers and HBAs/Initiators available to allow access to the new Logical Disk, and
the right column lists Servers and HBAs allowed to have access to the new Logical Disk.
NOTE: Colored text in the New Logical Disk Server Presentation dialog box has specific
meanings; for example:
• The FC HBA name is
• The FC HBA name is
• The server name is
• The server name is
• The server name is
4. Determine which servers and HBAs/initiators on the available list in the left pane you want to have
access to the new logical disk. Then click Add to move individual items to the allowed access list in the
right pane. To move all items on the available list to the allowed access list, click Add All.
NOTE: If you add an HBA or server by mistake, select the HBA or server in the right-hand list and
click Remove. To clear the allowed to have access list and start the selection again, click Remove
All.
5. (Optional) To manually give an HBA access to the logical drive, complete the following steps:
a. On the New Logical Disk Server Presentation dialog box
The New HBA Port Names dialog box opens
blue if it has a physical connection to the logical disk subsystem.
red if it has no physical connection to the logical disk subsystem.
blue if all the HBAs have a connection.
red if none of the HBAs have a connection.
maroon if at least one HBA has a connection.
(Figure
HP StorageWorks Simple SAN Connection Manager User Guide
(Figure 52) opens.
(Figure 52), click Manual Add.
53).
87