Manually Creating A Partition; Ready To Create Disk Partition Message Box - HP StorageWorks SN6000 - Fibre Channel Switch User Manual

Figure 73

Ready to create disk partition message box

4. To create the disk partition, click OK.
Simple SAN Connection Manager initializes the LUN, creates a single partition for the entire LUN,
assigns the next available drive letter, and formats the partition with NTFS.

Manually creating a partition

Use the Create & Manage Partitions dialog box to:
• Add a new partition
• Initialize a new partition
• Assign a drive letter or path to a new partition
To create a partition from an existing logical disk:
1. On the Advanced Operations menu, click Create & Manage Partition.
If there is more than one Windows 2003/2008 Server with assigned LUNs, the Server Selection for
Partition Management window opens. If there is only one server with assigned LUNs, Simple SAN
Connection Manager automatically selects that server.
2. If the Server Selection for Partition Management window opens, select the server on which you want to
create the partition, and then click OK.
Simple SAN Connection Manager searches the selected server for new and existing disks. These disks
are LUNs that have been created on the storage subsystems and unmasked (assigned) to the server.
The Create & Manage Partitions dialog box opens; see
associated disks on the top part and the map of disks and its partition(s) on the bottom. From the
disk/partition map, you can initialize new disks, add new partitions, modify or delete existing
partitions, and retrieve properties of the disk and partition.
108 Managing servers
Figure 74. This dialog box shows the LUNs and