Change Drive Letter And Paths Dialog Box; Add Drive Letter Or Path Dialog Box - HP StorageWorks SN6000 - Fibre Channel Switch User Manual

The Create & Manage Partitions dialog box opens; see
disks on the top part and the map of disks and its partition(s) on the bottom.
From the disk/partition map, you can initialize new disks, add new partitions, modify or delete existing
partitions, and retrieve properties of the disk and partition.
3. To add a partition drive letter or path:
a. Right-click the partition, and on the shortcut menu, click Change Drive Letter and Paths.
b. On the Change Drive Letter and Paths dialog box
Figure 78

Change Drive Letter and Paths dialog box

The Add Drive Letter or Path dialog box
Figure 79

Add Drive Letter or Path dialog box

c. You can either assign a drive letter or mount it on an empty NTFS folder as follows:
• To assign a drive letter to the partition, click Assign the following drive letter and select a drive
letter from the list. (This option is disabled if the partition already has a drive letter assigned.)
• To mount the partition on an empty NTFS folder (drive path), click Mount in the following empty
NTFS folder and then either type in the full path name of the folder or click Browse to select one.
You can mount the partition on more than one empty NTFS folder.
d. To assign the selected drive letter or drive path, click OK. To stop, click Cancel.
4. To change a partition drive letter or path:
a. Right-click the partition, and on the shortcut menu, click Change Drive Letter and Paths.
b. On the Change Drive Letter and Paths dialog box
The Change Drive Letter dialog box
Figure
(Figure 78), click Add.
(Figure 79) shows the partition number and size.
(Figure 78), click Change.
(Figure 80) shows the partition number and size.
HP StorageWorks Simple SAN Connection Manager User Guide 113
74. It shows the LUNs and associated