Downloading Additional Maps - HP 348773-001 User Manual

Downloading Additional Maps

The Navigation System easily lets you change map information stored on your iPAQ PocketPC or
removable storage cards.
CAUTION: If you install additional maps, Navigation System warns that any existing
map information is erased from the storage location. This is to prevent the maps
from occupying a considerable amount of storage space.
If you need to store a number of maps, you can use different removable SD or CF
cards.
To access the map installer after Navigation System is installed on your Desktop and iPAQ Pock-
etPC, do the following:
1. Connect the iPAQ PocketPC to your Desktop
CAUTION: Verify the Navigation System is closed before installing additional maps.
For more information refer to the Closing the Navigation System section.
2. Double click the Navigation system icon on your Desktop screen.
The Map Loader screen is displayed.
3. Select a download method, as follows:
By State - Click on each state to download, or click the check box next to each state name
For more information, refer to the Downloading a Map by Region section.
By City - Enter the State, City, and radius around the selected city. For more information,
refer to the Downloading a Map by City section.
The selected state or city size displays in the Selected Size box on the Map Loader screen.
4. Select the storage location (i.e., iPAQ Pocket PC Main Memory or SD Card) from the Target
Location pop up box on the Map loader screen.
5. Click on the Generate Map button.
If you accept the removal of existing maps, the new selected map(s) are
downloaded to your iPAQ PocketPC.
User's Guide
Loading the Navigation System Software
Downloading Additional Maps
.
1-7