Updating An Hba Driver; Update Hba Bios Wizard - HP StorageWorks SN6000 - Fibre Channel Switch User Manual

Figure 44

Update HBA BIOS wizard

12. To complete the Update HBA BIOS wizard, choose one of the following options:
• To confirm and proceed with the BIOS update, click Finish.
• To change your selections for BIOS update, click Back.
• To stop BIOS update, click Cancel.
If you clicked Finish, a message box states the HBAs are ready to be updated. This process takes a
while and the system is temporarily unresponsive.
13. When prompted to update the HBAs, click Yes.

Updating an HBA driver

Simple SAN Connection Manager provides an easy way to update both Windows and Linux drivers for HP
StorageWorks Q-Logic-based FC HBAs within your SAN. Before you begin, visit the HP website to
download the latest driver file. (Simple SAN Connection Manager may have prompted you to download a
driver file if it detected an out-of-date file when you started the application.)
NOTE: This feature is not supported with Emulex based HBAs.
To update an HBA driver:
1. To access the HBA Driver Update wizard, choose one of the following options:
• On the HBA & Switch Management menu, click Update HBA Driver.
• In the content pane's Physical Connection or LUN Assignment map, right-click the server icon. Then
on the shortcut menu, click Update HBA Driver to select that specific server to update the HBA driver.
The HBA Driver Update wizard opens.
2. If a specific server is selected, click Next to go to
80 Managing HBAs
step 3.