HP StorageWorks SN6000 - Fibre Channel Switch User Manual page 143

PCI Express (PCIe) A third-generation input/output (I/O) standard that allows enhanced Ethernet network
performance beyond that of the older Peripheral Component Interconnect (PCI) and PCI
Extended (PCI-X) desktop and server slots. The higher performance of PCI Express derives from
its faster, serial-bus architecture, which provides a dedicated, bi-directional I/O with 2.5-GHz
clocking, beneficial to Ethernet network connectivity for desktops, workstations, and servers.
port Access points in a device where a link attaches. The four types of ports include the following:
•
•
•
•
port instance The number of a port in the system. Each HBA may have one or multiple ports, identified with
regard to the HBA as port 0, port 1 and so forth. to avoid confusion when dealing with a
system containing numerous ports, each port is assigned a port instance number when the
system boots up. So Port 0 on an HBA might have a port instance number of, for example, 8 if
it is the eighth port discovered by the system.
SAN Storage area network, multiple storage units (disk drives) and servers connected by networking
topology.
SAS Serial attached SCSI; a data transfer technology designed to move data to and from computer
storage devices such as hard drives and tape drives.
SATA Serial advanced technology attachment; the new standard for connecting hard drives with
serial signaling technology.
SPI Security parameter index, an identification tag added to the header while using IPsec for
tunneling IP traffic. This tag helps the kernel discern between two traffic streams where different
encryption rules and algorithms may be in use.
SSSU HP Storage System Scripting Utility software (SSSU), a powerful scripting utility. The SSSU
provides a host to array communications bridge for documenting and automating EVA local
and remote configuration tasks.
stack A set of up to six switches interconnected through one or more of the four XPAK 10Gb ports.
The stack can be managed as though it were a single switch.
target The storage-device endpoint of a SCSI session. Initiators request data from targets. Targets are
typically disk-drives, tape-drives, or other media devices. Typically a SCSI peripheral device is
the target, but a host bus adapter may, in some cases, be a target. A target can contain many
LUNs.
A target is a device that responds to a requested by an initiator (the host system). Peripherals
are targets, but for some commands (for example, a SCSI COPY command), the peripheral
may act as an initiator.
target binding The process in which the HBA driver binds a target ID using a target's world wide port name
(WWPN) or port ID. This enables the target ID to always connect to the WWPN or port ID
across reboots regardless of SAN reconfigurations.
topology The collection of components that connect ports. Topologies are also shorthand descriptions of
the physical layouts, or shapes, of networks. A topology defines different aspects of device
connection or configuration—including the kinds of devices that can be configured, the number
of devices, and the way they can be configured. Simple SAN Connection Manager enables
you to save and compare topologies.
VDS Virtual Disk Service (VDS) is a set of application programming interfaces (APIs) that provides a
single interface for managing disks. VDS provides an end-to-end solution for managing storage
hardware and disks, and for creating volumes on those disks.
N_Port (Node Port)—an FC port that supports point-to-point topology.
NL_Port (Node Loop Port)—an FC port that supports loop topology.
F_Port (Fabric Port)—a port in a fabric where an N_Port can attach.
FL_Port (Fabric Loop Port)—a port in a fabric where an NL_Port can attach.
HP StorageWorks Simple SAN Connection Manager User Guide 143