Deleting A Logical Disk; Delete Logical Disk Dialog Box - HP StorageWorks SN6000 - Fibre Channel Switch User Manual

NOTE: Logical disk (LUN) expansion is a direct request to the subsystem to expand the logical disk size
using unused space. The servers that have access to this logical disk might not recognize the new space for
the disk until the server is rebooted or some software is invoked to discover the new size. In Windows, for
example, you can use the Diskpart command-line utility to extend the volume to the newly-added space. In
Linux, you can use the lvextend command to extend the size of a logical volume.

Deleting a logical disk

Simple SAN Connection Manager provides an easy way to delete logical disks from your SAN.
To delete a logical disk:
1. On the Logical Disk Operations menu, click Delete Logical Disk.
The Delete Logical Disk dialog box
Figure 66

Delete Logical Disk dialog box

2. From the Logical Disk List, select the check box next to the logical disk(s) you want to delete. (To delete
all logical disks, select the Select All check box.)
NOTE:
the list.
3. Click Delete Logical Disk.
4. To confirm the deletion, click Yes.
5. Repeat steps 2 through 4 to delete additional logical disks.
6. When you are finished deleting logical disks, click Close.
100 Managing logical disks (LUNs)
(Figure
For HP MSA 1000/1500 subsystems, you can delete only the logical disk at the bottom of
66) opens.