RS232 PC-FAX EXPANDER Type 185
6.3
QUICK DIALS, SPEED DIALS, AND GROUP DIALS
For more details, refer to "Quick Dial", "Speed Dial", "Group Dial" in the fax
machine manual.
For Memory Transmissions you can use the fax machine's programmed Quick
Dials, Speed Dials, and Group Dials to dial G3 and G4‡ destinations from the PC
by using a dialing prefix.
1. The User Parameter Switch 20 is set for memory transmission.
Digit 0 is 1.
See section 5 for more Switch 20 information.
2. Follow the sending procedures of your faxing application's user manual.
3. Dial as follows.
Quick Dial
#
Speed Dial
# *
Group Number
# * *
Group Quick Dial
#
For example :
TO DIAL:
Quick Dial 01
Speed Dial 0 1
Group 01 (stored in Quick Dial 02) # * * 0 1 (or # 0 2)
‡ Requires ISDN unit option
Press the pound key (#).
Press the numbers of the Quick Dial.
Press the pound key (#).
Press the asterisk key once (*).
Press the numbers of the Speed Dial
Press the pound key (#).
Press the asterisk key twice (* *).
Press the numbers of the Group
Press the pound key (#).
Press the numbers of the Quick Dial
programmed with the Group
PRESS:
# 0 1
# * 0 1 (or # * 0 0 1) G3/G4
11
USER'S GUIDE
FOR:
‡
G3/G4
‡
‡
G3/G4