Authorized Reception - Ricoh Afico 180 Copy Reference Manual

A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the number of the "Fax".
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Key Op. Settings" using the
number keys and press the { { { { #} } } }
(Enter) key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [ Prev.] or [ Next].
E
Enter the function number for
"Special RX Nos.". using the
number keys.
KEY OPERATOR SETTINGS
F
Enter the function number for
"Print Sender List" using the
number keys.
G
Press the { { { { Start} } } } key.
When the printing job is complet-
ed, the display shown in 6 appears
again.
Note
If you press [Cancel] before
printing starts, printing stops
and the display shown in 6 ap-
pears again.
H
Press [PrevMenu] twice.
I
Press the { { { { User Tools/Counter} } } } key.

Authorized Reception

This feature helps you to reject junk
mail. It lets you specify which termi-
nals you wish to receive fax messages
from; the others will be shut out. This
is useful if you are very annoyed with
someone.
You can register the following:
• 30 Specified Senders (up to 20
characters for each sender)
• Wild Card P.191 "Wild Cards"
Important
It is recommended that you print
the Sender/Authorized Reception
list and keep it when you register
or change a sender.
PORTS/LISTS"
Limitation
You cannot register a Specified
Sender who does not have an RTI
or CSI.
You can register up to 30 senders
for Forwarding, Special RX Nos.,
and Authorized Reception func-
7
P.143 "RE-
167