Setting Up A Client Computer; Windows95/98 - Ricoh Afico 180 Copy Reference Manual

Setting Up a Client Computer

This section describes how to set up a client computer when you use a NetWare
print server.
Note
This section assumes that the client has NetWare client applications installed
and is correctly configured to communicate with a NetWare print server. If
not, install necessary applications before starting the setting up procedure.

Windows95/98

Follow these steps to set up a Windows 95/98 client.
Preparation
Log in to the NetWare file server before starting the following procedure.
A
Install the printer driver of the printer you want to use as "Local printer".
Reference
For more information on installing the printer driver, refer to the Operat-
ing Instructions for your printer.
Note
Any port is selected during the installation, however, LPT1 is recommend-
ed.
B
Click [Start], point to [Settings], and then click [Printers].
C
In the [Printers] window, select the icon of the printer you want to use by
clicking it.
D
On the [File] menu, click [Properties].
E
Click [Details] tab, and click [Add Port].
F
Click [Network] and click [Browse].
G
On the network tree, double-click the name of the computer used as the
print server.
The names of the printers attached to the network are displayed.
H
Click the queue you want to print to highlight it, and click [OK].
I
Click [OK].
In the [Print to the following port] box, a network path to the printer appears.
J
Click [OK] to close the printer's property, and again, open it.
Setting Up a Client Computer
3
45