Copying From The Bypass Tray - Ricoh Afico 180 Copy Reference Manual

Copying from the Bypass Tray

Use the bypass tray to copy onto OHP
transparencies, adhesive labels, trans-
lucent paper, post cards, envelopes
and copy paper that cannot be set in
the paper tray.
Note
The machine can automatically de-
tect the following sizes as standard
size copy papers:
Metric version A3L, A4L, A5L,
8"
Inch version 11"
1
8 /
2
When you set the standard size pa-
per except the sizes as above, you
have to specify the standard size.
See P.41 "When copying onto
standard size copy paper".
If you do not use the standard size
copy paper, you should input ver-
tical and horizontal dimensions.
The sizes that you can input are as
follows:
Metric version • Vertical: 90 –
305mm
• Horizontal: 148 –
1,260mm
Inch version • Vertical: 3.5" – 12.0"
• Horizontal: 5.8" –
49.6"
To make copies onto OHP trans-
parencies or thick paper (105 –
2
162g/m , 28 – 43lb), be sure to
specity the paper type [thick]. See
P.42 "When copying onto OHP trans-
parencies or thick paper".
To make copies onto envelopes,
See P.43 "When Copying onto Enve-
lopes".
13"L
17"L,
" 11"L
Copying from the Bypass Tray
Reference
For details about paper capacity of
the bypass tray, see
Paper".
A
Open the bypass tray.
B
Lift the paper hold lever.
1: Paper hold lever
2: Extender
Note
Swing out the extender to sup-
port larger size copy paper.
P.17 "Copy
2
39