Ricoh Afico 180 Copy Reference Manual page 271

NetWare Configuration
J
Input "PCONSOLE" from the command prompt.
F:> PCONSOLE
K
Create a print queue as follows.
Note
If you use a currently defined print queue, proceed to the step L.
A In the [Available Options] menu, select [Print Queue Information].
B Press {Insert} and input a print queue name.
C Press {Esc} to return to the [Available Options] menu.
3
L
Create a printer as follows.
A In the [Available Options] menu, select [Print Server Information].
B To create a new print server, press {Insert} and input a print server name.
If you use an currently defined print server, select one of the print servers
shown in the [Print Server] list.
Important
Use the same name as that specified in the NIB Setup Tool. (Step H-A).
C In the [Print Server Information] menu, select [Print Server Configuration].
D In the [Print Server Configuration menu], select [Printer Configuration].
E Select the printer which is indicated as "Not Installed".
Important
Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step H-D).
F If you change the name of the printer, input a new name.
A name "Printer x" is assigned to the printer. x stands for the number of the
selected printer.
G As Type, select [Remote Parallel, LPT1].
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
H Press {Esc}, and click [Yes] in the confirmation dialog.
I Press {Esc} to return to the [Print Server Configuration Menu].
36