Ricoh Afico 180 Copy Reference Manual page 553

Facsimile User Tools
tions. You sometimes cannot regis-
ter 30 senders depending on the
number of senders registered with
other functions. If you attach the
optional Fax Function Upgrade to
the machine, you can register up to
50 senders.
Note
To register a sender, use an RTI or
CSI.
To find out a senders RTI/CSI,
check the TCR.
You need to switch Authorized Re-
ception on.
UP RX"
You can specify whether to receive
messages from only Specified
Senders or to exclude messages
from Specified Senders. The de-
fault setting is "Receive from Au-
thorized
"Changing the User Parameters"
7
Programming Specified Senders
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
168
P.146 "INITIAL SET-
Senders". P.184
C
Enter the number of the "Fax".
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Key Op. Settings" using the
number keys and press the { { { { #} } } }
(Enter) key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [ Prev.] or [ Next].
E
Enter the function number for
"Authorized RX" using the num-
ber keys.
F
Enter the function number for
"Register Sender" using the num-
ber keys.