Extension Cords - Craftsman 320.21195 Operator's Manual

EXTENSION CORDS
Use a proper extension cord. ONLY use cords listed by Underwriters Laboratories
(UL) Other extension cords can cause a drop in line voltage, resulting in a loss of
power and overheating of tool
For this tool an AWG (American Wire Gauge) size of a least 14-gauge is
recommended for an extension cord of 25- ft. or less in length Use 12-gauge for an
extension cord of 50-It Extension cords 100-fto or longer are not recommended.,
Remember, a smaller wire gauge size has greater capacity than a larger number
(14-gauge wire has more capacily than 16-gauge wire; 12-gauge wire has more
capacity than 14-gauge) When in doubl use lhe smaller number
When operating a power tool outdoors, use an outdoor extension cord marked
"W-A" or "W" These cords are rated for outdoor use and reduce the risk of electric
shock,
Z_ CAUTION: Keep the extension cord clear of the working arem Posltfon
the cord so that it will not get caught on lumber, tools or other obstructions
while you are working with a power tool,
Z_ WARNING: Check extension cords before each use+ If damaged
replace immediately, Never use tool with e damaged cord since touching
the damaged area could cause electrical shock, resulting In serloue Injury,
The label on your tool may include the following symbols
V ............................... Volts
A ............................ Amps
Hz ........................ Hedz
W .......................... Watts
rain .................. Minu_es
'-,............................. Alternating Current
................... Direct Current
No-lead Speed
Q ....................... Class II construction
,/min ............... Revolulions or Strokes per minule
Z_ ......... Indicates danger, warning caution
It means altentiont Your safety is involved