Table of Contents
Advertisement
TRANSMITTING A TWO-SIDED ORIGINAL
Follow these steps to automatically transmit a two-sided original. (This is only possible on models that have an RSPF installed.)
Do not use an original that is not a standard size (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R, B5, B5R, or A5).
Note
Otherwise a scanning error or cut-off image may result.
1
Make sure the machine is in scan
mode.
When the SCAN indicator is lit,
ON LINE
PRINT
DATA
the machine is in scan mode. If
the indicator is not on, press
SCAN
the [SCAN] key. If auditing
mode has been enabled for the
LINE
FAX
DATA
scan function in the system
settings, a message will appear
prompting you to enter your account number when you
switch to scan mode. Enter your account number (five
digits) with the numeric keys.
2
Place the original(s) in the document
feeder tray.
For information on placing an original, see "4. COPY
FUNCTIONS" of the "Operation manual (for general
information and copier)".
3
Check the original size.
AUTO%
OUTPUT
DUPLEX
FORMAT
ORIGINAL SIZE
DUPLEX SCAN
BROADCAST
ORIGINAL SIZE
DUPLEX SCAN
Press the [ORIGINAL SIZE] key to open the original
size selection screen. See
SCANNING SIZE" (page 26)
4
Press the [DUPLEX SCAN] key.
OUTPUT
DUPLEX
ORIGINAL SIZE
DUPLEX SCAN
T
ORIGINAL SIZE
DUPLEX SCAN
The duplex mode
selection screen appears.
• Two-sided scanning is not possible when "COLOR MODE" is set to "COLOR" or "GRAY".
Note
• Booklets and tablets
Two-sided originals that are bound at the side are booklets, and two-sided
originals that are bound at the top are tablets.
• Two-sided scanning mode turns off after the transmission is finished. Two-sided
scanning mode can also be canceled by pressing the [CA] key.
• Two-sided scanning is only possible when an RSPF is used. Automatic scanning
of both sides of an original is not possible when the document glass is used.
• Two-sided scanning of originals longer than 11" x 17" (A3) is not possible.
• To cancel two-sided scanning, select "1-SIDED" in step 5 and then press the [OK] key.
(Page
19)
ORIGINAL SIZE
INCH
11x17
8 x14
1
2
8 x11
1
2
"MANUALLY SETTING THE
to set the original size.
DUPLEX SCAN
1-SIDED
2-SIDED
HOW TO USE THE NETWORK SCANNER FUNCTION
5
Select "2-SIDED" with the [ ] or [ ]
key.
PQ
UPLEX
LEX SCAN
LEX SCAN
ACC
6
Press the [OK] key.
The duplex original type
GHI
BACK
OK
selection screen appears.
PQRS
X
AN
7
Select booklet or tablet for the duplex
original type with the [ ] or [ ] key.
8
Press the [OK] key.
OK
You will return to the base screen and the duplex
scanning mode icon will appear.
9
Continue from step 4 of "BASIC
TRANSMISSION PROCEDURE"
DUPLEX SCAN
1-SIDED
2-SIDED
DUPLEX STYLE
BOOKLET
(page
20).
BOOKLET
TABLET
25
2
Advertisement
Table of Contents
