Table of Contents
Advertisement
4. Password Setup
Setup a password to limit operators for the following menu.
TEACH mode ........ [Jog&Teach]-[Maintenance]
AUTO mode .......... [Main Menu]-[Program Mode...]
Follow the procedure below to set the password.
(1) Turn ON the Controller.
(2) Double click the <EPSON RC+ 5.0> icon on the desktop.
(3) Select EPSON RC+5.0 menu-[Setup]-[Controller]-[Configuration] to display the
(4) Click the <Change> button at "TP Program Mode Password."
(5) The following dialog appears.
NOTE
(6) Click the <Apply> button and reboot the Controller.
TP1 Rev.5
following page.
Enter a password with 1 to 16 numerals from the keyboard and click the <OK>
button.
More than one letter is assigned to each key on the TP. If characters other than
numerals are used for the password, the password input will be complicated.
Operation 4. Password Setup
99
Advertisement
Table of Contents
