2.3 Changing Jog Distance Data
This section indicates settings in the [Jog Distance] screen.
Press the <F2> key in the [Jog&Teach] screen.
The following screen appears.
When a value has been changed, press the <Enter> key to apply the value, and be sure to
press the <OK> key to save the settings.
2.3.1 Changing Distance Data
Set the distance for each joint.
(1) Move the cursor to [Distance], press the <Jog Dist> key to select the distance (Long,
(2) Move the cursor to each joint, and set the value.
2.3.2 Return Data to Defaults
Press the <F1> key to return jog distance data to their defaults.
TP1 Rev.5
Medium, Short) that is to be changed.
Operation 2. TEACH Mode
37