Activating The Srgb Color Management Function; Auto Search Function - Sharp Notevision PG-M20X Operation Manual

Activating the
This function calibrates the projector's output to conform to sRGB standard (6,500K).
Setting the Color Manage-
ment Function (sRGB)
Select "sRGB" in the "Options (1)" menu
➝ For settings, see page 36.
Note
• When setting sRGB to "ON", the pro-
jected image may become dark; however,
this does not indicate a malfunction.
• For additional information about sRGB
function, please visit "http://www.srgb.com/".
Info
When "sRGB" is set to "ON";
• The gamma correction cannot be set.
• "Red", "Blue" or "CLR Temp" in "Picture"
cannot be adjusted.

Auto Search Function

This function automatically searches for and switches to the input mode in which signals are
being received, when the projector is turned on, or when the INPUT button is pressed.
Using Auto Search
Select "Auto Search" in the "Options
(1)" menu ➝ For settings, see page 36.
Note
•
ON
Automatically switches to the input mode
in which signals are being received, when
turning on the projector or pressing
on the projector.
•
OFF
For switching input modes manually in
order by pressing
• To stop searching for the input mode,
press on the projector, or
on the remote control.
Info
• Even while this function is searching for input
signals, whenever ,
mote control is pressed, the input mode is
switched to the respective one.
• Even while the function is searching for input
signals, pressing any buttons besides
and returns to the previous input mode.
sRGB Color Management Function
on the projector.
, or
or on the re-
,
-53