Selecting The Picture Display Mode - Sharp PG-C45XU Operation Manual

Selecting the Picture Display Mode

This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input signal, you can choose "NORMAL", "FULL", "DOT BY
DOT", "BORDER", "STRETCH" or "SMART STRETCH" image.
Switching the Picture
Display Using Different
Input Signals
Press .
• Each time
is pressed, the display
changes as shown on page
Info
• In the Dot by Dot Mode, images are dis-
played in the original resolution, therefore
they will not be enlarged.
• To return to the standard image, press
while "RESIZE" is displayed on the screen.
COMPUTER
SVGA (800 × 600)
XGA (1024 × 768)
4:3 aspect ratio
SXGA (1280 × 960)
UXGA (1600 × 1200)
SXGA (1280 × 1024)
Other aspect ratios
• "NORMAL" is fixed when XGA (1024 × 768) signals are entered.
Input Signal
Resolution lower than
XGA
4:3 aspect ratio
XGA
4:3 aspect ratio
Resolution higher than
XGA
4:3 aspect ratio
SXGA (1280 × 1024)
-52
52 and 53.
NORMAL
1024 × 768
1024 × 768
1024 × 768
1024 × 768
960 × 768
NORMAL
Projects a full screen image
while maintaining the aspect ratio.
Screen display of the picture display mode
FULL DOT BY DOT
800 × 600
—
—
1280 × 960
—
1600 × 1200
—
1024 × 768 1280 × 1024
Output screen image
FULL DOT BY DOT
Projects a full screen image Projects the original resolution
while ignoring the aspect ratio. signal of the image.
RESIZE
button
—