Selecting The Picture Display Mode - Sharp XG-NV6XM Operation Manual

Selecting the Picture Display Mode

This function allows you to modify or customise the picture display mode to enhance the input image. Depending
on the input signal, you can choose NORMAL, WIDE, DOT BY DOT, DOT BY DOT (WIDE), or FIT TO SCREEN
image.
• Each time RESIZE is pressed, the picture mode changes as shown below.
Projector
RESIZE
button
NORMAL
For DTV decoder RGB signal in 4:3 aspect ratio.
For computer SVGA signal or DTV decoder RGB signal in 16:9 aspect ratio.
For COMPUTER/RGB signal without 4:3 aspect ratio.
For video PAL signal.
• "FIT TO SCREEN" is displayed only when SXGA signals that are not in 4:3
• DOT BY DOT mode displays images in their native resolution and not expanded to fit the LCD resolution.
• To return to NORMAL mode, press UNDO while "RESIZE" is displayed on the screen.
VOL
ON
Remote control
EXAMPLE
MODE
INPUT SIGNAL
NORMAL
WIDE
DOT BY DOT
DOT BY DOT ( WIDE )
WIDE
g
g
g
DTV
4:3 16:9
480 P 720 P
1024 768 1024
1024 576 —
640 480 1280
853 480 —
DOT BY DOT
g
g
g
aspect ratio
COMPUTER VIDEO
SXGA PAL
576 960 768 1024
1024 768 1024
720 1280 1024 720
— —
DOT BY DOT (WIDE)
g
are input.
768
576
540
36