Connecting To A Computer For Usb Mouse Control - Epson PowerLite S39 User Manual

Connecting to a Computer for USB Mouse Control

Downloaded from ManualsNet.com search engine
Note: The projector converts the digital audio signal sent from your computer into a mono analog signal
for the internal speaker or a stereo analog signal if you are connecting to external speakers. (Make sure
the HDMI audio playback device on your computer's audio settings is set to EPSON PJ.)
Note: The projector converts the digital audio signal sent from your computer into a mono analog signal
for the internal speaker. If you have problems hearing audio through the HDMI connection, connect one
end of an optional 3.5 mm stereo mini-jack audio cable to the projector's Audio port and the other end to
your computer's audio out port. Then select the audio port you connected to as the HDMI Audio Output
setting in the Extended menu.
Parent topic: Connecting to Computer Sources
If you connected your computer to a Computer, USB-B, or HDMI port on the projector, you can set up
the remote control to act as a wireless mouse. This lets you control projection at a distance from your
computer. To do this, connect the projector to your computer using a USB cable, if it is not connected
already.
1. Connect a USB cable to your projector's USB-B port.
PowerLite S39
PowerLite X39
36