Quick Return; Edit Search - Sharp ViewCam Slim VL-AX1S Operation Manual

Quick Return

Available mode:
TAPE-CAMERA
If while playing back your tape you want to
quickly return to the last recorded scene and
start recording again, use the quick return
function.
RETURN button
1
Set the camcorder to TAPE-CAMERA
mode.
2
Press the RETURN button.
• "SEARCH" flashes, and the tape begins
fast forwarding or rewinding to the end
of the last recorded scene.
S E A RC H
AU T O
• When the tape reaches the end of the
last recorded scene, "FINISHED" is
displayed, and the camcorder enters
Recording Standby mode.
Notes:
• To cancel the quick return function while
"SEARCH" is flashing, press the RETURN button
again.
• Quick return will not work if you remove the
cassette and reload it after recording or if
nothing has been recorded since loading.

Edit Search

Available mode:
TAPE-CAMERA
The edit search function lets you search,
without switching from TAPE-CAMERA mode to
TAPE-VCR mode, for the point on the tape
where you wish to start recording next.
1
Set the camcorder to TAPE-CAMERA
mode.
2
In Recording Standby
mode, press and hold
down
search) or
edit search) on the
Operation button.
3
When you find the point where you want
to begin recording, release the button.
3 0 min
Notes:
• The sound is off during search.
• Forward edit search is performed at the same
speed as normal playback, and reverse edit
search at 6.5 times the normal playback.
• You may experience picture noise during reverse
edit search.
Operation button
(reverse edit
(forward
36