Tape Playback Functions With The Remote Control - Sharp ViewCam Slim VL-AX1S Operation Manual

Tape Playback
Functions with the
Remote Control
Available mode:
TAPE-VCR
You can use the following playback functions
with the supplied remote control. (See page 45
for use of the remote control.)
Reverse Playback
The reverse playback function allows you to
play back video in reverse.
During playback in TAPE-VCR mode,
press the button.
To return to normal playback, press the PLAY
button ( ).
Slow
The slow function allows you to play back
images in slow motion.
During playback in TAPE-VCR mode,
press the SLOW button (
To view slow playback in reverse,
press the button.
To return to normal playback, press the PLAY
button ( ).
Note:
• To protect the tape, the camcorder automatically
returns to normal playback if it is left in Slow
mode for more than 10 minutes.
SLOW button
PAUSE/STILL button
Advance/reverse
buttons
).
Frame Advance
The frame advance function allows you to play
back still images frame by frame.
1
During playback in TAPE-VCR
mode, press the PAUSE/STILL
button ( ) to pause playback.
2
Press the (or
• Each time you press the
button, the picture advances
one frame forward (or
backward).
To return to normal playback, press the PLAY
button ( ).
Notes:
• The sound is off during reverse, slow, and frame
advance playback.
• If you use the slow or frame advance function
with the tape recorded in LP mode, the picture
may advance several frames at a time.
• You can take clearer still images by recording
with a fast shutter speed (see page 59).
) button.
46