Playback; Using The Time Code - Sharp ViewCam Slim VL-AX1S Operation Manual

Advanced Features
Advanced Features

Playback

Playback

Using the Time Code

Available modes:
TAPE-VCR, TAPE-CAMERA
The time code shows the hour, minute and
second of recording, and the frame number
(1 frame = approx. 1/25 sec.). This is automati-
cally recorded along with the subject when you
are recording on the tape. You can display the
time code on the screen as an accurate
counter in both TAPE-VCR and TAPE-CAMERA
modes.
Display format
T C 0 0 0 1 0 2 0
Second
Minute
Hour
• The example screens shown are for TAPE-VCR
mode.
1
During playback or camera recording in
TAPE modes, press the MENU button
until the menu screen appears.
2
Turn the CONTROL dial to select
then press the dial.
3
Turn the CONTROL dial to select "TIME
CODE", then press the dial.
O T H E R S
D E F A U L T
R EMO T E
S OUND
T I ME CO D E
T C OU T
R E T U RN
4
Turn the CONTROL dial to select "DISP.
ON", then press the dial.
T I ME CODE
63
Frame number*
* Displayed during still or
frame advance playback.
,
D I S P . O F F
D I S P . ON
D I SP. ON
5
Press the MENU button to turn off the
menu screen.
• The time code appears.
To turn off the time code
Select "DISP. OFF" in step 4 above.
Notes:
• When the tape reaches an unrecorded section,
the time code returns to zero (TC0:00:00). Once
recorded, the time code cannot be changed.
• You can also press the T/C (Time Code) button
on the remote control to display the time code.
Displaying the time code on a
TV during playback
1
In TAPE-VCR mode, press the MENU
button until the menu screen appears.
2
Turn the CONTROL dial to select
then press the dial.
3
Turn the CONTROL dial to select "TC
OUT", then press the dial.
O T H E R S
D E F A U L T
R EMO T E
S OUND
T I ME CO D E
T C OU T
R E T U RN
4
Turn the CONTROL dial to select "ON",
then press the dial.
T C OU T
5
Press the MENU button to turn off the
menu screen.
TC 0 0 5 : : 3 5
Time code
,
O F F
O N
ON