Sharp ViewCam Slim VL-AX1S Operation Manual page 79

Adjusting the SHUT.SPEED
scene setting
1
After performing step 2 on the previous
page, turn the CONTROL dial to select
"SHUT.SPEED", then press the dial.
S C E N E ME NU
O F F
S H U T . S P E E D
E X P O S U R E
S P OR T
S UN L I GH T
P A R T Y
DU S K
2
Turn the CONTROL dial to select the
desired shutter speed, then press the
dial.
• In TAPE-CAMERA mode, you can select
17 speeds from 1/25 sec. ("25") to 1/
10,000 sec. ("10000").
• In CARD-CAMERA mode, you can select
9 speeds from 1/25 sec. ("25") to 1/500
sec. ("500").
• The F-number is adjusted automatically.
SC E N E ME NU
SHU T. S P E E D E X PO S U R E
1 0 2
3
Set the Manual Selection switch to
LOCK to lock the selected scene setting.
• "SHUT.SPEED" appears.
S H U T . S P E E D
Scene setting indicator
Adjusting the EXPOSURE
scene setting
1
2
F . 1 8
3
To cancel the scene setting
Select "OFF" in step 3 on the previous page.
Note:
• Scene settings cannot be used with Gain-up
function.
After performing step 2 on the previous
page, turn the CONTROL dial to select
"EXPOSURE", then press the dial.
S C E N E ME NU
O F F
S H U T . S P E E D
E X P O S U R E
S P OR T
S UN L I GH T
P A R T Y
DU S K
Turn the CONTROL dial to select the
desired F-number, then press the dial.
• You can select 15 steps from F1.8 to
F19.
• The shutter speed is adjusted automati-
cally.
SC E N E ME NU
E X PO S U R E
F . 1 8
Set the Manual Selection switch to
LOCK to lock the selected scene setting.
• "EXPOSURE" appears.
E X PO S UR E
Scene setting indicator
SHU T. S P E E D
5 0
62