When Projecting From The Side Of The Screen; Adjusting The Vertical Position Of The Projection Area (Lens Shift) - Epson EMP-8300 User Manual

Adjusting the Screen Image

When projecting from the side of the screen

If the projector cannot be set up directly in front of the screen, you can
project images at a horizontal angle to the screen. If keystone distortion
appears in the images, you can use the projector's Quick Corner function
to correct this keystone distortion.
Adjusting the Vertical Position of the Projection Area
(Lens Shift)
The vertical position of the projection area can be adjusted by moving the
lens up or down.
Highest lens position
10
Centre
of lens
0
p.52
Lowest lens position
0
5
5
10
PROCEDURE
Press the [Lens Shift] buttons on either the remote control
or the projector's control panel.
If you press the [6] button on the remote control or the [
projector's control panel, the projection area will move up.
If you press the [3] button on the remote control or the [
projector's control panel, the projection area will move down.
Remote control
TIP
Do not use electronic lens shift adjustment (using button operations)
if the projector is fitted with an optional rear projection wide lens.
Refer to the documentation for the rear projection wide lens for
further details.
50
] button on the
] button on the