Solutions When Network Alert E-Mails Are Not Received; Solutions When The Image Contains Static During Network Projection; Solutions When You Cannot Connect Using Screen Mirroring - Epson EB-810E User Manual

Solving Network Problems
• "Projector Feature Settings - Operation Menu"
Solutions When Network Alert E-Mails are not
Received
If you do not receive an e-mail alerting you to problems with a projector over
the network, try the following solutions:
• Make sure the projector is turned on and connected to the network correctly.
(If an error shuts down the projector, the email may not be delivered.)
• Make sure you set up the projector e-mail alert settings correctly in the
projector's network Mail Notification menu or in the network software.
• Set the Standby Mode setting to Communication On in the projector's
Operation menu so that the network software can monitor the projector in
standby mode.
And change the Port setting according to your network environment.
Related Links
g
• "Network Menu - Mail Notification Menu"
• "Projector Feature Settings - Operation Menu"
Solutions When the Image Contains Static During
Network Projection
If the projected image contains static during network projection, try the
following solutions:
• Check for any obstacles between the access point, the computer, the
mobile device, and the projector, and change their positions to improve
communication.
p.200
p.213
p.200
• Make sure that the access point, the computer, the mobile device and the
projector are not too far apart. Move them closer together and try to connect
again.
• Check for interference from other equipment, such as a Bluetooth device or
microwave. Move the interfering device farther away or expand your wireless
bandwidth.
• Reduce the number of connected devices if the connection speed declines.
Solutions When You Cannot Connect Using Screen
Mirroring
If you are unable to connect to the projector using Screen Mirroring, try the
following solutions:
• Check the projector's settings.
• Set the Simple AP setting to On.
Network > Network Settings > Simple AP
s
• Set the Screen Mirroring setting to On.
Network > Network Settings > Network Projection > Screen
s
Mirroring
• Select the Screen Mirroring setting to Off and select On again.
Network > Network Settings > Network Projection > Screen
s
Mirroring
257