Changing The Resize/Aspect Ratio; Applying Saved "Video" Menu Settings; Selecting The Computer Display Method - Epson EMP-8300 User Manual

Functions for Enhancing Projection Functions for Enhancing Projection

Applying Saved "Video" Menu Settings

PROCEDURE
While projecting analogue RGB images from a computer,
press the [Preset] button on the remote control to apply
the saved setting values for the "Video" menu to the
images that are currently being projected.
The memorised preset number changes in ascending order starting
from the lowest recording area number each time the button is
pressed.
You must press the [Preset] button while the preset number and input
resolution appear on the screen, otherwise the selection will not
change.
Remote control
TIP
• Preset numbers that have not yet been preset will be skipped.
• If no preset settings have been made, the message "No Entry" will
appear when you press the [Preset] button.
Preset number and input
resolution appear

Changing the Resize/Aspect Ratio

Selecting the Computer Display Method

When projecting computer images, the display method can be changed
between resized display (in which the images are projected so that they fill
the available projection area) and real display (in which the images are
projected at the resolution of the original input signal).
When projecting computer images, the default method used is resized
display.
PROCEDURE
The display method switches between real display and
resized display each time the [Resize] button on either the
remote control or the projector's control panel is pressed.
Remote control
71