Epson EMP-8300 User Manual page 141

Saving a User's Logo Saving a User's Logo
Select "Yes" at the confirmation screen, and then
7
press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel.
The image will then be saved. Once the image has been saved,
the message "Completed." will be displayed.
User's Logo
Save image as user's logo?
YES
If you save it, the previous user's logo will
be overwritten.
TIP
• Saving the user's logo may take a few moments (about 15 seconds).
Do not use the projector or any other sources which are connected to
the projector while the user's logo is being saved. If this is not
observed, it may result in errors in projector operation.
• Once a user's logo has been saved, the logo setting cannot be
returned to the factory default.
NO
140