Using the Configuration Menu Functions
Using the Configuration Menu Functions
Sub-menu
Direct
(EMP-9300 only)
Power ON
When the projector's power cable is connected to a wall
outlet, projection can be started without having to press the
[Power] button.
To turn the power off, press the [Power] button, wait for
cool-down
to finish then disconnect the power cable.
Reset
Resets all adjustments values for the "Advanced2" menu
functions except for the "Projector ID" and "Network"
settings to their default settings.
•Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel to
reset.
•Select "Reset All" to reset all menu settings – including
settings for the "Video" and "Audio" menus – to their
default settings.
Function
p.95
93
Default
OFF
-