Epson EMP-8300 User Manual page 98

Using the Configuration Menu Functions Using the Configuration Menu Functions
Select a sub-menu item.
4
If using the remote control, tilt the [ ] button up or down to
select a sub-menu item.
If using the projector's control panel, press the [Sync +] or
[Sync -] button to select a sub-menu item.
:
Startup Screen ON OFF
:
OFF Video
Progressive
:
Color Adjustment
Color Temp. RGB
-
Black Level : 0
0 -
White Level :
:
Rear Proj. ON OFF
:
Ceiling ON OFF
:
Standby Mode Network ON
Language Select [English]
Reset Execute
TIP
The items appearing in the "Video" menu and the "About" menu will
vary depending on the type of input source being projected.
Film/Auto
Adjust
+
+
Network OFF
Select a setting value.
5
Tilt the [ ] button on the remote control or press the [Tracking +]
or [Tracking -] button on the projector's control panel to change
setting values.
For items which are currently set, a appears in green next to
the setting. If you tilt the [ ] button on the remote control or
press the [Tracking +] or [Tracking -] button on the projector's
control panel to select an item to be set, the will appear in
orange. After making the selection, press the [Enter] button on
the remote control or the [Auto/Enter] button on the projector's
control panel to accept the setting. When the setting is accepted,
the changes to green.
:
Startup Screen ON OFF
:
Progressive OFF Video
Color Adjustment :
Color Temp. RGB
: 0 -
Black Level
White Level : 0 -
:
Rear Proj. ON OFF
:
Ceiling ON OFF
:
Standby Mode Network ON
Language Select [English]
Reset Execute
TIP
• Sub-menu items which cause another sub-menu to be displayed
when they are selected have
items and press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel, you can then
change the settings in the next sub-menu which appears.
• Refer to "List of Functions" for details on the functions of each
menu item. p.78
Film/Auto
Adjust
+
+
Network OFF
after them. If you select such menu
97