Epson EMP-8300 User Manual page 87

Using the Configuration Menu Functions Using the Configuration Menu Functions
Sub-menu
A/V Mute Sets the screen status when the [A/V Mute] button is
pressed.
The images for the input signal are displayed unchanged on
an external monitor while the A/V Mute function is being
used only when "A/V Mute" is set to "Black".
•To change the user's logo, you need to record your own
logo. p.138
•With the EMP-9300, if the "User's Logo Protect" function
of Password Protect has been set to "ON", the "Logo"
setting cannot be changed to "Black" or "Blue", nor can it
be changed from "Black" or "Blue" to "Logo". Cancel the
Password Protect function before changing these settings.
p.38
Computer1 Selects the video signal to match the device that is
Input connected to the [Computer 1] port.
Computer2 Selects the video signal to match the device that is
Input connected to the [Computer 2] port.
BNC Input Selects the video signal to match the device that is
connected to the [BNC] port.
Sleep Sets the energy saving operation when no video signal is
Mode being input.
•When set to "ON", projection stops automatically and after
the cool-down period is finished, the projector changes
to sleep mode (standby mode) if no operations are carried
out for approximately 30 minutes while the "No Signal."
message is being displayed. (The
orange.)
•Projection starts again when the [Power] button on either
the remote control or the projector's control panel is
pressed.
Function
p.33
indicator lights
86
Default
Black
Analog-RGB
Analog-RGB
Analog-RGB
OFF