If The Rgb Output Ports Are The 3Bnc Ports - Epson EMP-8300 User Manual

Connecting to a Video Source

If the RGB Output Ports are the 3BNC Ports

Use a commercially-available RGB video cable to make the connections.
To RGB output ports
RGB video cable
(commercially-available)
TIP
• After projection starts, change the "BNC Input" setting in the
"Setting" menu to "RGB-Video".
• If more than one external component is connected to the projector,
press the [BNC] button on the remote control after projection starts,
or repeatedly press the [Video/BNC] button on the projector's control
panel until "BNC (RGB-Video)" is displayed on the projected image
to select the signal to be projected.
red
green
blue
To [BNC] ports
p.86
p.43
29