Connecting To A Video Source; Projecting Composite Video Images - Epson EMP-8300 User Manual

Connecting to a Video Source

CAUTION
When connecting the projector to other video sources, take the
following precautions.
• Turn the power off for both the projector and the video source before
connecting them. If the power for either device is on at the time of
connection, damage may result.
• Check the shapes of the cable connectors and the device ports before
making the connections. If you try to force a connector to fit a device
port with a different shape or number of terminals, damage to the
connector or port may result.
• Do not bind the power cable and the connecting cable together. If
the power cable and the connecting cable are bound together, image
interference or errors in operation may result.
Projecting Composite Video
Use a commercially-available RCA video cable to make the connection.
To video output port
(yellow)
RCA video cable
(commercially-available)
TIP
If more than one external component is connected to the projector,
press the [Video] button on the remote control after projection starts,
or repeatedly press the [Video/BNC] button on the projector's control
panel until "Video" is displayed on the projected image to select the
signal to be projected. p.43
26
Images
To [Video] port (yellow)