Playing Sound From The Computer - Epson EMP-730 User Manual

Connecting to a Computer

Playing Sound from the Computer

The projector has a single built-in speaker with a maximum output of 1 W. If
the computer that is connected to the projector has an audio output port, you
can output sound from the computer through the projector's speaker by
connecting the computer's audio output port and the Audio-In port (stereo mini
jack) at the rear of the projector using a stereo mini-pin audio cable
(commercially-available). It is recommended that you use an audio cable with a
3.5 mm diameter stereo mini jack.
To audio output port
Use the following procedure to adjust the volume of the sound output.
Procedure
1
Press the [Menu] button on the
remote control, and then select
"Volume" from the "Audio"
menu.
For details on this operation, refer to
"Using the Configuration Menus".
(p.57)
2 Use the [ ] and [ ] buttons to
adjust the volume.
The volume is increased or reduced
each time a button is pressed.
3 After making the adjustment,
press the [Menu] button to exit
the configuration menu.
20
Stereo mini-pin audio cable
(commercially-available)
To Audio-In port
Video Volume : -
10
Audio Tone : -
0
Setting Reset
Execute
User's Logo
Advanced
About
Reset All
: Return : Select : Adjust
Video Volume :
15
-
Audio Tone :
0 -
Setting Reset
Execute
User's Logo
Advanced
About
Reset All
: Return : Select : Adjust
+
+
+
+