Connecting To A Desktop Macintosh - Epson ELP-3000 Owner's Manual

Connecting to a desktop Macintosh

Before beginning, turn off the projector and Macintosh if they are on. To access the
connectors on the projector, push open the cover located on the right side of the
projector, under the handle.
1. Attach the Macintosh adapters provided with the projector to the appropriate
2. Disconnect the monitor cable from the monitor port on the back of the
3. Connect the VGA adapter (attached to the Y-cable) to the Macintosh's monitor
4. Connect the Y-cable's LCD connector
5.
on the Y-cable. Connect the MONITOR adapter to the MONITOR
connectors
connector (la), and connect the VGA adapter to the VGA connector (1b).
Macintosh and it to the MONITOR Macintosh adapter.
connect
port.
Tighten the screws for all connectors to make sure they are fastened securely.
the projector's Computer IN/OUT port.
to
Connecting to a Computer
9