Connecting to a Desktop Macintosh
♦
Connecting the Computer Cable
Downloaded from:
To connect the projector to your desktop Macintosh, you
need to:
• Connect the computer cable
• Connect the mouse cable (if you want to use the remote
control as a mouse)
• Connect the audio cable (if you'll be projecting with audio)
Follow the steps in each section for the cables you need to
connect. Before beginning, turn off the projector and
computer if they are on.
Note: Macintosh configurations vary. See your com puter
m anual for the location of the ports needed to connect your
projector.
First connect the computer cable. Refer to this illustration as
you follow the steps below.
Computer port
http://www.usersmanualguide.com/
Macintosh desktop
adapter
computer cable
Connecting to a Computer
13