Connecting To A Desktop Macintosh - Epson PowerLite 5000 User Manual

Connecting to a Desktop Macintosh

Before beginning, turn off the projector and Macintosh if they are on.
1.
1 Installation
l
Connect the video cables.
Note: Macintosh computer configurations vary. See your computer
manual for the location of the ports needed to connect your
PowerLite 5000 projector.
a. Connect either end of the video cable to the projector's
1
Computer In port. (Use the Computer In 2 port if you are
connecting a second computer.)
b. Remove the small cover and set the DIP switches on the
Macintosh video adapter in accordance with the resolutions
you want to use (such as
video-out cable
16
inch mode).