Options Menu - Epson ELP-3000 Owner's Manual

Options menu

40 3
l
Prompt Temporarily displays a prompt on the projector screen to
identify which source (computer or video) is providing
the image. This prompt appears only when you switch the
image source.
Backgrnd Specifies what is shown onscreen when an image signal
is not available. The options are Test Pattern (default),
Black, or Blue.
serial Enables communication between your computer and the
projector. See Chapter 4 for more information.
Power Save Specifies in minutes how long the projector waits for an
image signal before entering standby mode. If an image
signal is not received within the specified time, the
projector automatically enters standby mode.
Power Save can be 5 to 60 minutes. The default is 10.
Automatically places the projector in standby mode when
Delay On
it is turned on.
Using the Menus
default Delay On is off.
By