Standby Mode - Epson ELP-3000 Owner's Manual

Serial Communication Kit
The Serial Communication Kit allows your computer and projector to communi-
cate over an RS-232C connection. The kit includes an RS-232C serial cable and
two software utilities: ELP Link and ELP Remote Programmer.
ELP Link allows you to make adjustments to the projector from your computer.
l
The same controls that are available on your remote control, including the
ability to access the projector menus, are available from the main ELP Link
screen.
The ELP Remote Programmer allows you to use the remote control to control
l
your computer. The trackball moves the mouse on your computer monitor, and
five buttons on the remote control can be programmed to drag or click
windows and icons or perform the same functions as keys on your keyboard.
For information on using ELP Link, see Chapters 2 and 3. For information on the
ELP Remote Programmer, see Chapter 4.

Standby mode

Standby mode conserves electricity by automatically turning off the lamp if the
projector has not been used for a specified period of time (the default is
10 minutes). In standby mode, the projector remains on but the lamp is turned
off. This conserves electricity, cools the projector, and extends the life of the lamp.
Use the Standby button on the remote control to turn standby mode on or off.
Getting the Most Out of Your Projector
i x