Connecting To A Desktop Macintosh - Epson PowerLite 8000i User Manual

Connecting to a Desktop Macintosh

To connect the projector to your desktop Macintosh, you need to:
Follow the steps in each section for the cables you need to connect.
Before beginning, turn off the projector and computer if they are on.
Notes:
1 • Setting Up the Projector
34
Connect the projector video cable and computer monitor cable
Connect the mouse and/or serial cable (if you want to use the
remote control as a mouse or use the ELP Link IV software)
Connect the audio cable (if you'll be projecting with audio)
Macintosh configurations vary. See your computer manual for the
location of the ports needed to connect your projector.
You cannot currently use the ELP Link IV software with a Power
Macintosh G3 or iMac. Check with your dealer for future support.